Services

By Charles Inyende


CopperLink Electrical offers practical, reliable services across three departments — electrical work, electronics, and graphic design — serving clients in Butere, Kakamega County, and surrounding areas in Western Kenya.

⚡ Electrical Installation & Maintenance

From new wiring to fault diagnosis, we handle residential and commercial electrical work with a focus on safety and code-compliant installation.

  • New house wiring and rewiring
  • Distribution board installation and upgrades
  • Electrical fault finding and repair
  • Earthing and grounding system installation
  • Single phase and three phase connections
  • Load assessments for businesses and workshops
  • Routine electrical safety inspections

🔌 Electronics Retail & Repair

We sell and repair a range of electronics, helping clients get the most out of their devices and appliances without unnecessary replacement costs.

  • Electronics sales — components, accessories, and devices
  • Appliance and gadget repair
  • Diagnostic and troubleshooting services
  • Power surge and damage assessment

🎨 Graphic Design & Printing

Beyond electrical and electronics work, CopperLink also supports local businesses with design and print services.

  • Logo and branding design
  • Business cards, flyers, and posters
  • Banners and signage
  • Digital design for social media and marketing

Why Work With CopperLink?

CopperLink combines hands-on technical training (Electrical Engineering, Butere Technical Training Institute) with real site experience since 2024. Every job is approached with attention to safety, proper diagnosis before repair, and clear communication with clients — whether it's a small home repair or a larger commercial installation.

Get a Quote

Reach out via WhatsApp or email to discuss your project. We're happy to do a site visit or assessment before providing a quote, so you know exactly what the job involves.

📍 Based in: Kakamega County, Western Kenya
📱 WhatsApp: =254708651559
✉️ Email: cinyende1@gmail.com

Comments

Post a Comment

Subscribe by Email

Popular posts

Common Electrical Faults in Kenyan Homes and How to Fix Them (2026 Guide)

By Charles Inyende
Image
If you've lived in a Kenyan home for any length of time, chances are you've dealt with at least one of these problems: a breaker that trips for no obvious reason, lights that flicker when you switch on the kettle, or sockets that feel warm to the touch. Having worked on residential and small commercial sites around Kakamega since 2024, I've seen these issues come up again and again. Here's a breakdown of the most common electrical faults in Kenyan homes, what causes them, and how they're properly fixed. 1. Frequent Breaker Tripping This is one of the most common complaints I get on site visits. A circuit breaker trips when it detects an overload or a short circuit — it's doing its job, protecting your wiring from overheating. Common causes: Too many high-draw appliances on one circuit (kettle, iron, microwave sharing a line) A faulty appliance with an internal short Worn-out wiring insulation causing a ground fault The fix: Don't just keep resettin...
Read more

How to Read a Distribution Board: Beginner's Guide for Electrical Technicians

By Charles Inyende
Image
 When I started doing site work back in 2024, one of the first practical skills I had to build — beyond what we covered in class at Butere TTI — was confidently reading a distribution board (DB). It looks intimidating at first: rows of breakers, bundles of cable, labels that may or may not make sense. But once you understand the logic behind it, it becomes second nature. This post breaks it down the way I wish someone had explained it to me early on. What a Distribution Board Actually Does A distribution board takes the incoming power supply and splits it into multiple circuits, each protected by its own breaker. Think of it as the control center of a building's electrical system — every circuit, from lighting to sockets to the water heater, branches out from here. The Main Components You'll See 1. Main Switch / Isolator This is the master control — it cuts power to the entire board. Always the first thing to switch off before working on anything inside the DB. 2. Busbars...
Read more

Single Phase vs Three Phase Power Explained (Kenya Guide 2026)

By Charles Inyende
Image
 One question I get a lot from clients planning a new connection or upgrading their premises is: "Do I need single phase or three phase power?" It sounds like a small technical detail, but getting it wrong can mean paying for capacity you don't need, or worse, not having enough power for your equipment. Here's a clear explanation, drawn from real installation work. What's the Actual Difference? Electricity from KPLC is delivered as alternating current (AC), and it can come to your premises in one of two configurations: Single phase power uses one live wire and one neutral wire. It's the standard supply for most residential homes and small shops in Kenya. It typically delivers around 230V and is sufficient for lighting, sockets, fridges, TVs, and most household appliances. Three phase power uses three live wires (each carrying current 120 degrees out of phase with the others) plus a neutral. It delivers more total power and is more stable under heavy, con...
Read more